* Engine Model: Genuine TUFFMOTO - High Output - 49cc 2 Stroke Engine
* Engine Type: 2 Stroke - Single Cylinder - Air Cooled
* Cooling System: Air Cooled
* Starting System: Alloy Pull Start
* Transmission: Single SPEED Fully Automatic
* Fuel Type: Pre-mixed Petrol and Fully Synthetic Oil at ratio 32:1
* Intake / Exhaust: N/A
* Frame: Silver High Strength Steel
* Handlebar: Silver High Strength Steel
* Front Rim: Alloy
* Rear Rim: Alloy
* Seat height should be approx 600mm
* Front Tyre: 2.50 - 10
* Rear Tyre: 2.50 - 10
* Front Suspension: Upside Down Front Fork
* Rear Suspension: Heavy Duty Monoshock Suspension
* Front Brakes: Disc Brakes
* Rear Brakes: Disc Brakes
ENGINE
Engine Model
Genuine TUFFMOTO - High Output - 49cc 2 Stroke Engine
Engine Type
2 Stroke - Single Cylinder - Air Cooled
Brand
TUFFMOTO
Cooling System
Air Cooled
Compression
N/A
Bore x Stroke
N/A
Maximum Output KW / HP
N/A
Maximum Power / Rotating Speed
2.5KW / 8000rpm
Gearing
N/A
Idle Speed
N/A
Starting System
Alloy Pull Start
Clutch Type
N/A
Transmission
Single SPEED Fully Automatic
Carburetor
N/A
Ignition
N/A
Fuel Type
Pre-mixed Petrol and Fully Synthetic Oil at ratio 32:1
Engine Oil Grade
N/A
Magneto Type
N/A
Intake / Exhaust
N/A
Final Drive
Chain
Spark Plug
N/A
MATERIAL
Frame
Silver High Strength Steel
Swingarm
Silver High Strength Steel
Controls
Alloy
Triple Clamps
Silver High Strength Steel
Handlebar
Silver High Strength Steel
Handlebar Grips
Soft High Grip Rubber
Fuel Filter
N/A
Rim (Front)
Alloy
Rim (Rear)
Alloy
Tyre (Front)
2.75 - 10
Tyre (Rear)
2.75 - 10
Suspension (Front)
Upside Down Front Fork
Suspension (Rear)
Heavy Duty Monoshock Suspension
Brakes (Front)
Disc Brakes
Brakes (Rear)
Disc Brakes
CAPACITY
Maximum Speed
> 50kph*
Maximum Load
N/A
Fuel Tank Capacity
1L
Engine Oil Capacity
N/A
Tube Diameter of Muffler
N/A
DIMENSIONS
Seat Height
approx 600mm
Ground Clearance / Wheel Base
190mm / 800mm
G.W. / N.W.
24 / 21 kgs
Product Size
1130 x 580 x 700 mm
Package Size
1050 x 300 x 530 mm
Additional Information:
* Minor assembly is required.
* In the interest of safety it is recommended that you have this bike assembled by a skilled bike mechanic.
* The bike comes 90% assembled
* The engine requires straight unleaded petrol.
* The oil required for this model is 15w40 or 10w40 ( full synthetic )
* Before using the product, please check that all nuts, wiring and bolts are tightened before riding as they can become loose during shipping.
* For the first tank, run in the engine, please do not over-rev the engine for the first 1-3 months as the engine is new and should be treated as such.